NEC UNIVERGE SV8100 System Hardware Manual page 321

UNIVERGE SV8100
System Hardware Manual
7. Carefully push the Serial cable into the Serial Cable
Groove (ITL, DT700 only).
Figure 5-71 Press Serial Cable into Groove
8. Using the guides, slide the DCL-60-1 onto the
installed bracket (refer to
Cable into Groove).
9. Secure the DCL-60-1 CONSOLE to the bracket with
the two screws provided.
Figure 5-72
Figure 5-71 Press Serial
Securing the DCL-60-1 CONSOLE
with Screws
Issue 5.0
5 - 63