Installation - NEC UNIVERGE SV8100 System Hardware Manual

Issue 5.0
4 - 36
Table 4-14 IPLA Daughter Board Maximum Upgrade Capacities
provides the maximum capacities for the VOIPDB blades when they
are upgraded.
Table 4-14 IPLA Daughter Board Maximum Upgrade Capacities
19"
VOIPU Chassis
with CPU
PZ-32IPLA
PZ-64IPLA
PZ-128IPLA
When installing a IPLA Daughter board, the system allocates the
maximum number of trunk ports for the blade being installed.
This daughter board is installed on either the CD-CP00.
3.4.2

Installation

To install a PZ-32IPLA/PZ-64IPLA/PZ-128IPLA on the CD-CP00 :
1. With the system power off, remove the CD-CP00.
2. Install the IPLA Daughter board onto the CD-CP00 blade.
3. Insert the CD-CP00 into slot 1 in the Controlling Chassis or.
Refer to
.
3-41
4. Connect the IPLA Daughter board to the CD-RTB or to an
external switching hub using an ethernet cable.
5. Refer to the Univerge SV8100 Programming Manual for
detailed programming instructions.
3.4.3 Switch Settings
These daughter boards do not have any switches that need to be set
and do not require any hardware setting.
19" Chassis
without CPU
1 0
1 0
1 0
Do not remove or install the CD-CP00 with the
power on.
Figure 3-45 19" Controlling Chassis – Guides Slot 1 on page
for more details.
UNIVERGE SV8100
19" Chassis Networked
x4 Chassis
0 50
0 50
0 50
Installing the SV8100 Blades