Installing The Slt Adapter; Section 9 Single Line Telephone - NEC UNIVERGE SV8100 System Hardware Manual

Issue 5.0
S
S 9
INGLE
ECTION
9.1
5 - 94
L T
INE ELEPHONE

Installing the SLT Adapter

The Single Line Telephone adapter provides an interface for Single Line
Telephones and other similar devices from an ESI channel.
This adapter can be connected to any ESI port.
1. Connect one end of the RJ-11 to the ESI port on the chassis and one
end to the ESI jack on the SLT Adapter.
2. Connect one end of a second RJ-11 to the TEL jack on the SLT Adapter
and the other end to the Single Line Telephone.
2-wire
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
SLTII(1)-U( ) ADP
RJ-11
2-wire
ESI
Figure 5-120 Installing SLT Adapter
UNIVERGE SV8100
RJ-11