UNIVERGE SV8100
System Hardware Manual
two brackets in the shipped position (refer to
Brackets Secured in Mounting Position with
Figure 3-36 Brackets Secured in Mounting Position with Screws
7.
Rotate the brackets into the mounting position. Using the same
screws, secure the metal brackets to the bracket assembly
(refer to
Figure 3-36 Brackets Secured in Mounting Position
with
Screws).
8.
Remove the end brackets from the remaining two corners and
set aside (refer to
3-34).
Figure 3-37 Remove End Brackets on page
Issue 5.0
Figure 3-36
Screws).
3 - 33