Floor Mounting The 19" Chassis; Chs2U Chassis Installation - NEC UNIVERGE SV8100 System Hardware Manual

Issue 5.0
2.2
3 - 12

Floor Mounting the 19" Chassis

The CHS2U controlling and expansion chassis can be mounted on the floor
using the CHS BASE UNIT and the CHS2U JOINT BRACKET KIT.
2.2.1

CHS2U Chassis Installation

1. Use the template shown in
Guide
(10mm) anchor bolts (locally procured).
2. Mark and drill the four holes required for installing the CHS
BASE UNIT.
3. Using anchor bolts, secure the CHS BASE UNIT to the floor.
Refer to
Bolts on page 3-13
Figure 3-12 Floor Mount Spacing
for required spacing before drilling holes for 0.39"
Figure 3-12 Floor Mount Spacing Guide
Figure 3-13 Secure CHS BASE UNIT with Anchor
for screw location.
UNIVERGE SV8100
Installing the SV8100 Chassis