Displaying and Maintaining BOOTP Client Configuration
To do...
Display related information on a
BOOTP client
BOOTP Client Configuration Example
Network requirement
As shown in
Figure
1 obtains an IP address from the DHCP server by using BOOTP.
Configuration procedure
The following describes only the configuration on Switch B serving as a client.
# Configure VLAN-interface 1 to dynamically obtain an IP address from the DHCP server.
<SwitchB> system-view
[SwitchB] interface vlan-interface 1
[SwitchB-Vlan-interface1] ip address bootp-alloc
To make the BOOTP client obtain an IP address from the DHCP server, you need to perform additional
configurations on the DHCP server. For details, refer to
display bootp client [ interface
interface-type interface-number ]
2-2, Switch B's port belonging to VLAN 1 is connected to the LAN. VLAN-interface
Use the command...
DHCP Server Configuration
6-3
Remarks
Available in any
view
Examples.