Configuring An Interface To Dynamically Obtain An Ip Address Through Bootp; Displaying And Maintaining Bootp Client Configuration; Bootp Client Configuration Example - H3C S5120-SI Series Configuration Manual

•
RFC 951: Bootstrap Protocol (BOOTP)
•
RFC 2132: DHCP Options and BOOTP Vendor Extensions
•
RFC 1542: Clarifications and Extensions for the Bootstrap Protocol
Configuring an interface to dynamically obtain an
IP address through BOOTP
To configure an interface to dynamically obtain an IP address:
To do...
1. Enter system view
2. Enter interface view
3. Configure an interface to
dynamically obtain IP address
through BOOTP
Displaying and maintaining BOOTP client
configuration
To do...
Display related information on a
BOOTP client

BOOTP client configuration example

Network requirement
As shown in Figure 16, Switch B's port belonging to VLAN 1 is connected to the LAN. VLAN-interface 1
obtains an IP address from the DHCP server by using BOOTP.
Use the command...
system-view
interface interface-type interface-
number
ip address bootp-alloc
Use the command...
display bootp client [ interface
interface-type interface-number ]
56
Remarks
—
—
Required
By default, an interface does not
use BOOTP to obtain an IP
address.
Remarks
Available in any view