Maintenance
4. Close the rear door.
Adjustments and Maintenance Procedures
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is
enabled. You can also adjust color registration manually any time the printer is idle. You
must adjust the color registration any time the printer is moved. If you are having printing
problems, adjust the color registration.
Performing a Color Registration Adjustment
A color-registration adjustment occurs every time a new toner cartridge is installed. You
can run this adjustment at other times as needed.
To perform a color-registration adjustment:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Color Registration.
3. To perform an Automatic Color Registration adjustment, touch Start.
4. At the successfully completed prompt, touch Close.
5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.
Adjusting Paper Registration
Use Adjust Paper Registration to adjust the placement of the printed image on the page.
The adjustment allows you to place the top, bottom, left, and right margins exactly
where you want. You can specify the image position on both the front and back sides
of the paper, for each installed paper tray.
Verifying Paper Registration
1. At the printer control panel, press the Home button.
2. Log in as administrator. For details, refer to the System Administrator Guide at
www.xerox.com/office/VLC600docs.
®
®
7-8
Xerox
VersaLink
C600 Color Printer
User Guide