Adjustments And Maintenance Procedures; Color Registration; Adjusting Paper Registration - Xerox Phaser 6510 User Manual

Adjustments and Maintenance Procedures

This section includes:
•

Color Registration................................................................................................................................................................ 111

•

Adjusting Paper Registration ......................................................................................................................................... 111

• Adjusting the Voltage Offset ......................................................................................................................................... 114
• Adjusting the Fuser ............................................................................................................................................................. 114
• Adjusting the Altitude ....................................................................................................................................................... 115
• Performing an Engine Cleaning Procedure .............................................................................................................. 115
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is turned on.
You can also adjust color registration manually any time the printer is idle. You must adjust the color
registration any time the printer is moved. If you are having printing problems, adjust the color
registration.
Performing a Color Registration Adjustment
A color registration adjustment occurs every time a new toner cartridge is installed. You can run this
adjustment at other times as needed.
To perform a color registration adjustment:
1. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
Navigate to Admin Menu, then press OK.
2.
Navigate to Image Quality, then press OK.
3.
4. Navigate to Adjust Color Regi, then press OK.
At the prompt, press OK.
5.
When the process is complete, the printer displays Adjusted.
To return the printer to Ready, press Menu.
6.
Adjusting Paper Registration
Use Adjust Paper Registration to adjust the placement of the printed image on the page.
The adjustment allows you to place the top, bottom, left, and right margins exactly where you want.
You can specify the image position on both the front and back sides of the paper, for each installed
paper tray.
Xerox Phaser 6510 Color Printer
® ®
User Guide
Maintenance
111