Date And Time Are Incorrect; Scanner Errors - Xerox AltaLink B80XX Series User Manual

Date and Time Are Incorrect

Probable Causes
The Date and Time Setup is set to Manual
(NTP Disabled).
The time zone, date, or time is set incorrectly.

Scanner Errors

Probable Causes
Scanner is not communicating.
Solutions
To change the Date and Time to Automatic, in the Embedded
Web Server, enable NTP. For details, refer to the System
Administrator Guide at www.xerox.com/office/ALB80XXdocs.
Set the time zone, date, and time manually. For details, refer to
the System Administrator Guide at
www.xerox.com/office/ALB80XXdocs.
Solutions
Power off the printer. Wait 2 minutes, then power on the printer.
If the problem is not resolved, contact your Xerox
representative.
Xerox AltaLink B80XX Series Multifunction Printer
® ®
Troubleshooting
service
®
233
User Guide