Add / Edit A Server - 3xLogic vigil Client User Manual

5.1 Add / Edit a Server

Click the Add or Edit (with a Server Selected) buttons from the Servers window to open the Server Settings window. These options
are only available in Local mode.
-
22-
Enable this to use a VIGIL Connect alias or
serial number instead of an IP address. VIGIL
Use VIGIL Con-
Connect aliases are case sensitive so be sure
nect
it is an exact match of the alias configured
on the desired server.
The IP address or DNS name of the server.
To use a dial-up connection, leave this set-
IP/DNS Name ting blank and Enable Use Dial-up, select the
dialup connection to use from the drop-down
menu.
Open a window to change the default TCP/IP
TCP/IP Ports port settings if they have been altered on the
server. (See below)
The user name and password that VIGIL
Client will use to log in to the server. If
User Name/
these are left blank, a prompt will be opened
Password
during connection for the user name and pass-
word to be input manually.
Enable to use a dialup connection to connect
to a server.
Use Dialup
Note:
connection must be set up for this
feature to become enabled.
Check the connection to the Server on a set
Check Net-
interval and mark it as Offline if a set
work Status
number of timeouts occur.
Enter a site description to identify the in
Client or check-off Use Site Name for
Description
Description to name configured on the VIGIL
Server itself as its description.
Check for Check the Server for Alarms on a regular
Server Alarms interval. This option is enabled by default.
Update POS/ATM data from the server on a
Check for
set interval. This option is enabled by
Live POS/ATM
default.
At least one Windows dialup
©2014 3xLOGIC Inc. | VIGIL Client - User Guide