Table of Contents
Advertisement
2.5.1.7 Change Range Settings (RANGE SCALE)
There are various options for RANGE SETTINGS depending on which instrument is being used.
With the ALARM option, an alarm above a certain speed can be set.
For example, when it is set to 6, a new alarm is triggered (buzzer and audible) when the wind speed is above 6 Beaufort.
Figure 32: Range Settings AlphaWind
1. In the MENU, touch the RANGE SCALE button.
The RANGE SETTINGS MENU appears, see Figure 32: Range Settings AlphaWind on page 37
2. Touch the + button to ENABLE the ALARM, repeatedly touch the + button to increase the value.
3. Set the precise number at which point the ALARM must be triggered, by repeatedly touching the + and – buttons.
Note The ALARM can be set from 5,0 to 12,0 bft.
4. Touch the √ button to confirm the chosen value.
The MENU appears again.
37 | Operation
Advertisement
Table of Contents
