Change Of Ink Ribbon Cartridge - JRC JUE-87 Instruction Manual

A2.3.2 Change of Ink Ribbon Cartridge
1) Verify that the power switch remains turned OFF.
2) Open the printer cover.
3) Lift up the ink ribbon cartridge by holding the projection on the cartridge.
4) Using the knob on the new cartridge make the ribbontaut.
Projection
Print head
Knob
Immediately after printing, the printing head is still very hot, don't touch it until it is cool down.
Ink ribbon
cartridge
5) Manually move the print head to the left
edge.
6) Attach the ribbon with such a pen so that it
is between the ribbon mask and print
head.
7) Push lightly from top both ends of the
cartridge.
8) Turn again the cassette knob to give tension
to the ribbon.
9) Close the printer cover.
DANGER
A2-5