3.3.2
Confirming alert contents
When an alert is generated, the alert message is displayed in the "Active Alert tab".
3.3.3
Acknowledging the alert (CAT-A)
The Alarm of category-A cannot be acknowledged in alert management screen.
It is necessary to acknowledge this alarm at the generated equipment.
3.3.4
Acknowledging the alert (CAT-B)
After checking the alert contents, when the [ACK] button of the active alert list or [ACK] button of the
alert details is clicked on, the alert that is displayed is acknowledged.
When the [ALERT ACK] (alert acknowledgement) button on the trackball operation unit is pressed, the
alert that is displayed in the acknowledgeable alert information is acknowledged.
When there are a number of alerts, perform the same operation for each alert.
3.3.5
Acknowledging the alert (CAT-C)
The Alarm of category-C cannot be acknowledged in alert management screen.
Acknowledgment operation is necessary on the equipment from which the alert is detected.
Section 3 Bridge Alert Management (BAM)
3-28