Installing Compactflash; Figure 2-5. Compactflash Memory Card Compartment - adept technology Adept RS-232/TERM User Manual

Not all types of CompactFlash are compatible with the SmartController. Adept requires
the use of the CF supplied by Adept at the time of controller purchase and that all
replacement CF cards be purchased from Adept.
NOTE: With an AdeptWindowsPC ethernet connection you can also use
the supplied NFS software to remotely mount hard disk drives and
directories located on a Personal Computer (PC). See the
User's Guide
CAUTION:
electrostatic discharge during removal and installation of
the CompactFlash. This includes, but is not limited to, the
use of a grounded wrist strap while performing this
operation.
CAUTION:
is connected to the SmartController.

Installing CompactFlash

To install a CompactFlash (CF) into a SmartController:
1. Make sure that the SmartController is disconnected from its power source.
2. Locate the CF compartment (see

Figure 2-5. CompactFlash Memory Card Compartment

Adept SmartController User's Guide, Rev. E
for further details.
Use suitable measures for eliminating
Do not remove the CompactFlash when power
Figure
Controller Installation
AdeptWindows
2-5).
Eject Button
CompactFlash
Compartment
29