Manual Binding - TP-Link T2600G-28TS User Manual

The following entries are displayed on this screen:
DHCP Server Pool

Pool Name:
Network Address:
Subnet Mask:
Lease Time:
Default Gateway:
DNS Server:
Netbios Server:
Netbios Node Type:
Next Server
Address:
Domain Name:
Bootfile:
Pool Table

Select:
Pool Name:
Network Address:
Subnet Mask:
Lease Time:
Operation:

10.4.3 Manual Binding

In this page, you can specify the IP address for specific clients, and then the switch will supply
these specified parameters to them only forever.
Figure 10-17 Pool Setting
Enter the name of the pool.
Specify the network number of the IP addresses in the pool.
Specify the corresponding subnet mask of the IP address in the
pool.
Specify the lease time of IP addresses in the pool.
Specify the IP address of the default gateway for a client.
Specify the IP address of the DNS server for a client.
Specify the IP address of the Netbios server.
Specify the node type of the Netbios server.
Specify the next DHCP server's ip address during the DHCP boot
process.
Specify the domain name of the DHCP client.
Specify the boot file name of the DHCP client.
Select the entry to delete the IP pool.
Displays the name of the IP Pool.
Displays the network address of the IP Pool.
Displays the subnet mask of the IP Pool.
Displays the lease time of the IP Pool.
Allows you to view or modify the information of the
corresponding IP Pool.
Edit: Click to modify the settings of the Pool.

Detail: Click to get the information of the Pool.

199