Binding Table - TP-Link T2600G-28TS User Manual

detection and IPv6 Source Guard functions can control the network access and only allow the
Hosts matching the bound entries to access the network.
The following three IPv6-MAC Binding methods are supported by the switch.
(1) Manually: You can manually bind the IPv6 address, MAC address, VLAN ID and the Port
number together in the condition that you have got the related information of the Hosts in
the LAN.
(2) ND Snooping: You can use ND Snooping functions to monitor the process of the
duplication address detection, And record the IP address, MAC address, VLAN and the
connected Port number of the Host for automatic binding.
(3) DHCP Snooping: You can use DHCPv6 Snooping functions to monitor the process of the
Host obtaining the IPv6 address from DHCPv6 server, and record the IPv6 address, MAC
address, VLAN and the connected Port number of the Host for automatic binding.
These three methods are also considered as the sources of the IPv6-MAC Binding entries. The
entries from various sources should be different from one another to avoid collision. Among the
entries in collision, only the entry from the source with the highest priority will take effect. These
three sources (Manual, DHCP Snooping, ND Snooping) are in descending order of priority.
The IPv6-MAC Binding function is implemented on the Binding Table, Manual Binding and ND
Snooping pages.

13.2.1 Binding Table

On this page, you can view the information of the IPv6-related bound entries.
Choose the menu Network Security→IPv6-MAC Binding→Binding Table to load the following
page.
The following entries are displayed on this screen:
Search

Source:
Figure 13-5 Binding Table
Displays the Source of the entry.
All: All the bound entries will be displayed.
•
• Manual: Only the manually added entries will be
displayed.
• ND Snooping: Only the entries generated via ND
snooping will be displayed.
252