Vlan Config - TP-Link T2600G-28TS User Manual

9.2.3 VLAN Config

On this page you can configure MLD Snooping function with each single VLAN. You need to
create VLAN if you want to enable MLD Snooping function in this VLAN.
Choose the menu Multicast→MLD Snooping→VLAN Config to load the following page.
The following entries are displayed on this screen:
VLAN Config

VLAN ID:
Router Port Time:
Member Port Time:
Static Router Ports:
Forbidden Router
Ports:
VLAN Table

Select:
VLAN ID:
Figure 9-16 VLAN Config
Enter the VLAN ID you want to configure.
Specify the aging time of the router port. Within this time, if the
switch don't receive MLD query message from the router port, it
will consider this port is not a router port any more. By default, it
is 0 and the global router-time will be used.
Specify the aging time of the member port. Within this time, if the
switch don't receive MLD report message from the member port,
it will consider this port is not a member port any more. By
default, it is 0 and the global member-time will be used.
Specify the static router port which is mainly used in the network
with stable topology.
Specify the forbidden router ports which is mainly used to forbid
ports becoming router ports.
Select the VLAN ID you want to change.
Displays the VLAN ID.
162