Choose the menu Routing→DHCP Server→Manual Binding to load the following page.
The following entries are displayed on this screen:
Manual Binding
Pool Name:
IP Address:
Binding Mode:
Client ID:
Hardware Address:
Hardware Type:
Manual Binding Table
Displays the list of the configured binding entries of IP addresses and hardware addresses.
10.4.4 Binding Table
In this page, you can view the information about the clients attached to the Server.
Choose the menu Routing→DHCP Server→Binding Table to load the following page.
DHCP Server Binding Table
ID:
IP Address:
Client ID / Hardware
Address:
Figure 10-18 Manual Binding
Select the IP Pool containing the IP address to be bound.
Specify the IP address to be bound.
Select the binding mode of the manual binding.
Specify the identifier of the client.
Specify the hardware address to be bound.
Select the hardware protocol of the client.
Figure 10-19 DHCP Server Binding Table
Displays the ID of the client.
Displays the IP address that the Switch has allocated to the
client.
Displays the MAC address of the client.
200