Application Example For Private Vlan - TP-Link T2600G-28TS User Manual

UNIT:
Private VLAN Port Table

Port ID:
Port Type:
Note:
1. A Host Port can only join to one Private VLAN.
2. A Promiscuous Port can only join to one Primary VLAN.
3. If you want to add a Promiscuous port to different Private VLANs with the same Primary VLAN,
you need to add the Promiscuous port to any one of these Private VLANs.
Configuration Procedure:
Step Operation
1 Create Private VLAN.
2 Add ports to Private VLAN
3 Delete VLAN.

6.10 Application Example for Private VLAN

Network Requirements

Switch C is connecting to switch A, switch A is connecting to switch B;

Switch A is connecting to VLAN4 and VLAN5;

Switch B is connecting to VLAN5 and VLAN8;

For switch C, packets from switch A and switch B have no VLAN tags. Switch C needs not to

consider the VLANs of switch A and switch B;
Click 1 to configure the physical ports. Click LAGS to configure the
link aggregation groups.
Displays the port number.
Displays the corresponding Port Type.
Description
Required. On the VLAN→Private VLAN→PVLAN Config
page, Enter the Primary VLAN and Secondary VLAN, select
one type of secondary VLAN and then click the Create
button.
Required. On the VLAN→Private VLAN→Port Config
page, select the desired ports and configure the port types
and click the Apply button.
Optional. On the VLAN→Private VLAN→PVLAN Config
page, select the desired entry to delete the corresponding
VLAN by clicking the Delete button.
93