Mode:
Source:
Operation:
Click Edit to display the following figure.
The following entries are displayed on this screen:
Destination Port
Destination Port:
Source Port
Select:
Port:
Ingress:
Displays the mirror mode. The value will be "Ingress Only",
"Egress Only" or "Both".
Displays the mirrored ports.
You can configure the mirror session by clicking Edit, or clear the
mirror session configuration by clicking the Clear.
Figure 5-3 Port Mirror Config
Input or select a physical port from the port panel as the mirroring
port.
Select the desired port as a mirrored port. It is multi-optional.
Displays the port number.
Select Enable/Disable the Ingress feature. When the Ingress is
40