TP-Link T2600G-28TS User Manual page 15

Chapter
Chapter 4 System
Chapter 5 Switching
Chapter 6 VLAN
Chapter 7 Spanning Tree
Introduction
This module is used to configure system properties of the
switch. Here mainly introduces:
System Info: Configure the description, system time and

network parameters of the switch.
User Management: Configure the user name and password

for users to log on to the Web management page with a
certain access level.
System Tools: Manage the configuration file of the switch.

Access Security: Provide different security measures for the

login to enhance the configuration management security.
SDM Template: Manage the hardware TCAM resources.

This module is used to configure basic functions of the switch.
Here mainly introduces:
Port: Configure the basic features for the port.

LAG: Configure Link Aggregation Group. LAG is to combine a

number of ports together to make a single high-bandwidth
data path.
Traffic Monitor: Monitor the traffic of each port.

MAC Address: Configure the address table of the switch.

L2PT: Configure the Layer 2 Protocol Tunneling feature.

This module is used to configure VLANs to control broadcast in
LANs. Here mainly introduces:
802.1Q VLAN: Configure port-based VLAN.

MAC VLAN: Configure MAC-based VLAN without changing

the 802.1Q VLAN configuration.
Protocol VLAN: Create VLANs in application layer to make

some special data transmitted in the specified VLAN.
VLAN VPN: VLAN VPN allows the packets with VLAN tags of

private networks to be encapsulated with VLAN tags of public
networks at the network access terminal of the Internet
Service Provider.
GVRP: GVRP allows the switch to automatically add or

remove the VLANs via the dynamic VLAN registration
information and propagate the local VLAN registration
information to other switches, without having to individually
configure each VLAN.
Private VLAN: Designed to save VLAN resources of uplink

devices and decrease broadcast. Private VLAN mainly used
in campus or enterprise networks to achieve user layer-2-
separation and to save VLAN resources of uplink devices.
This module is used to configure spanning tree function of the
switch. Here mainly introduces:
STP Config: Configure and view the global settings of

spanning tree function.
Port Config: Configure CIST parameters of ports.

MSTP Instance: Configure MSTP instances.

STP Security: Configure protection function to prevent

devices from any malicious attack against STP features.
3