Basic Config - TP-Link T2600G-28TS User Manual

8.1.1 Basic Config

Choose the menu Ethernet OAM→ Basic Config→ Basic Config to load the following page.
The following entries are displayed on this screen:
Basic Config

Port Select:
Select:
Mode:
State:
Note:
You cannot establish an OAM connection between two OAM entities that work in the passive
mode.
Figure 8-4 Basic Config
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select the desired port for configuration. It is multi-optional.
Select the OAM mode for the desired port.
Select Enable/Disable the Ethernet OAM function for the desired
port.
121