Pool Setting - TP-Link T2600G-28TS User Manual

Option 138:
Ping Time Config

Ping Packets:
Ping Timeout:
Excluded IP Address

Configure the Excluded IP Address which cannot be assigned by the switch.
Start IP Address:
End IP Address:
Excluded IP Address Table

Select:
ID:
Start IP Address:
End IP Address:

10.4.2 Pool Setting

This page shows you how to configure the IP pool in which the IP address can be assigned to the
clients in the network.
Choose the menu Routing→DHCP Server→DHCP Server Pool to load the following page.
Configure DHCP option 138. If this option is configured, DHCP
server will response packets containing this option if the client
running CAPWAP protocol request this option.
The number of packets to be sent.
The time it takes to determine the specific IP not exist.
The first one of the IP addresses that should not be assigned.
The last one of the IP addresses that should not be assigned.
Select the entry to delete the Excluded IP Address pool.
Displays the corresponding ID of the Excluded IP Address
pool.
Displays the start IP Address of the Excluded IP Address pool.
Displays the last IP Address of the Excluded IP Address pool.
198