Packet Statistics - TP-Link T2600G-28TS User Manual

Overflow Action:
LAG:
Clear Binding:
Configuration Procedure:
Step Operation
1 Create Profile
2 Configure IP-Range
3 Configure Profile Binding
for ports

9.1.8 Packet Statistics

On this page you can view the multicast data traffic on each port of the switch, which facilitates you
to monitor the IGMP messages in the network.
Choose the menu Multicast→IGMP Snooping→Packet Statistics to load the following page.
The policy should be taken when the number of multicast group a
port has joined reach the maximum.
Drop: Drop the successive report packet, and this port can not

join any other multicast group.
Replace: When the number of the dynamic multicast groups

that a port joins has exceeded the max-group, the newly joined
multicast group will replace an existing multicast group with the
lowest multicast group address.
Displays the LAG number which the port belongs to.
Click the ClearBinding button to clear all profiles bound to the
port.
Description
Required. Configure
Multicast→IGMP Snooping→Profile Config page.
Required. Click Edit of the specified entry in the IGMP Profile
Info table on Multicast→IGMP Snooping→Profile Config
page to configure the mode or IP-range of the Profile.
Optional. Configure
Multicast→IGPM Snooping→Porfile Binding page.
154
the Profile ID and
Profile Binding for
mode on
ports on