Protocol Group; Protocol Template - TP-Link T2600G-28TS User Manual

6.5.2 Protocol Group

On this page, you can configure the Protocol Group.
Choose the menu VLAN→Protocol VLAN→Protocol Group to load the following page.
Protocol Group Config

Protocol Name:
VLAN ID:
Protocol Group Member

UNIT:

6.5.3 Protocol Template

The Protocol Template should be created before configuring the Protocol VLAN. By default, the
switch has defined the IP Template, ARP Template, RARP Template, etc. You can add more
Protocol Template on this page.
Figure 6-10 Enable Protocol VLAN for Port
Select the defined protocol template.
Enter the ID number of the Protocol VLAN. This VLAN should be one
of the 802.1Q VLANs the ingress port belongs to.
Click 1 to configure the physical ports. Click LAGS to configure the
link aggregation groups.
77