TP-Link T2600G-28TS User Manual page 125

Network Diagram

Configuration Procedure

Configure Switch A:

Step Operation
1 Configure ports
2 Enable STP function
3 Configure the region name and
the revision of MST region
4 Configure
mapping table of the MST region
Configure Switch B:

Step Operation
1 Configure ports
2 Enable STP function
Description
On VLAN→802.1Q VLAN→VLAN Config page,
configure the link type of the related ports as Tagged,
and add the ports to VLAN101-VLAN106. The detailed
instructions can be found in the section
On Spanning Tree→STP Config→STP Config page,
enable STP function and select MSTP version.
On Spanning Tree→STP Config→Port Config page,
enable MSTP function for the port.
On
Config page, configure the region as TP-LINK and
keep the default revision setting.
VLAN-to-Instance On
Config page, configure VLAN-to-Instance mapping
table. Map VLAN 101, 103 and 105 to Instance 1; map
VLAN 102, 104 and 106 to Instance 2.
Description
On VLAN→802.1Q VLAN→VLAN Config page,
configure the link type of the related ports as Tagged,
and add the ports to VLAN101-VLAN106. The detailed
instructions can be found in the section
On Spanning Tree→STP Config→STP Config page,
enable STP function and select MSTP version.
On Spanning Tree→STP Config→Port Config page,
enable MSTP function for the port.
Spanning Tree→MSTP
Spanning Tree→MSTP
113
802.1Q VLAN.
Instance→Region
Instance→Instance
802.1Q VLAN.