Port Config - TP-Link T2600G-28TS User Manual

9.2.2 Port Config

On this page you can configure MLD Snooping function with each single port.
Choose the menu Multicast→MLD Snooping→Port Config to load the following page.
The following entries are displayed on this screen:
Port Config

UNIT:1/LAGS
Select:
Port:
MLD Snooping:
Fast Leave:
LAG:
Figure 9-15 Port Config
Click 1 to configure the physical ports. Click LAGS to
configure the link aggregation groups.
Select the port you want to configure.
Displays the port number.
Select Enable/Disable MLD Snooping for the desired
port.
Select Enable/Disable Fast Leave feature for the
desired port. If Fast Leave is enabled for a port, the
switch will immediately remove this port from the
multicast group upon receiving MLD done messages.
Displays the LAG number.
161