Global Config - TP-Link T2600G-28TS User Manual

Security Mode of Voice VLAN

When voice VLAN is enabled for a port, you can configure its security mode to filter data stream. If
security mode is enabled, the port just forwards voice packets, and discards other packets whose
source MAC addresses do not match OUI addresses. If security mode is not enabled, the port
forwards all the packets.
Security Mode Packet Type
UNTAG packet
Packet with voice
VLAN TAG
Enable
Packet with other
VLAN TAG
UNTAG packet
Packet with voice
VLAN TAG
Disable
Packet with other
VLAN TAG
Table 11-3 Security mode and packets processing mode
Note:
Don't transmit voice stream together with other business packets in the voice VLAN except for
some special requirements.
The Voice VLAN function can be implemented on Global Config, Port Config and OUI Config
pages.

11.3.1 Global Config

On this page, you can configure the global parameters of the voice VLAN, including VLAN ID and
aging time.
Choose the menu QoS→Voice VLAN→Global Config to load the following page.
The following entries are displayed on this screen:
Global Config

Voice VLAN:
Processing Mode
When the source MAC address of the packet is the OUI
address that can be identified, the packet can be
transmitted in the voice VLAN. Otherwise, the packet will
be discarded.
The processing mode for the device to deal with the packet
is determined by whether the port permits the VLAN or not,
independent of voice VLAN security mode.
Do not check the source MAC address of the packet and all
the packets can be transmitted in the voice VLAN.
The processing mode for the device to deal with the packet
is determined by whether the port permits
not, independent of voice VLAN security mode.
Figure 11-12 Global Configuration
Select Enable/Disable Voice VLAN function.
222
the VLAN or