9.1.2 Port Config
On this page you can enable or disable the IGMP Snooping and Fast Leave feature for ports of the
switch.
Choose the menu Multicast →IGMP Snooping →Port Config to load the following page.
The following entries are displayed on this screen:
Port Config
UNIT:1/LAGS:
Select:
Port:
IGMP Snooping:
Fast Leave:
LAG:
Figure 9-6 Port Config
Click 1 to configure the physical ports. Click LAGS to configure the
link aggregation groups.
Select the desired port for IGMP Snooping feature configuration. It
is multi-optional.
Displays the port of the switch.
Select Enable/Disable IGMP Snooping for the desired port.
Select Enable/Disable Fast Leave feature for the desired port. If
Fast Leave is enabled for a port, the switch will immediately
remove this port from the multicast group upon receiving IGMP
leave messages.
Displays the LAG number which the port belongs to.
144