TP-Link T2600G-28TS User Manual page 81

Choose the menu VLAN→802.1Q VLAN→Port Config to load the following page.
The following entries are displayed on this screen:
VLAN Port Config

UNIT:1/LAGS:
Select:
Port:
Link Type:
PVID:
LAG:
Figure 6-5 Port Config
Click 1 to configure the physical ports. Click LAGS to configure the
link aggregation groups.
Select the desired port for configuration. It is multi-optional.
Displays the port number.
Select the Link Type from the pull-down list for the port.
• ACCESS: The ACCESS port can be added in a single VLAN,
and the egress rule of the port is UNTAG. The PVID is same as
the current VLAN ID. If the current VLAN is deleted, the PVID
will be set to 1 by default.
• TRUNK: The TRUNK port can be added in multiple VLANs.
The egress rule of the port is UNTAG if the arriving packet's
VLAN tag is the same as the port's PVID, otherwise the egress
rule is TAG. The PVID can be set as the VID number of any
valid VLAN.
• GENERAL: The GENERAL port can be added in multiple
VLANs and set various egress rules according to the different
VLANs. The default egress rule is UNTAG. The PVID can be
set as the VID number of any valid VLAN.
Enter the PVID number of the port.
Displays the LAG to which the port belongs.
69