TP-Link T2600G-28TS User Manual page 135

Link Monitoring:
Variable Request:
PDU Revision:
Operation Status:
Loopback Status:
Remote Client

The local client part shows the information of the remote OAM entity.
Mode:
Mac Address:
Vendor(OUI):
Max OAMPDU:
Remote Loopback:
Unidirection:
Link Monitoring:
Displays whether the local client supports link monitoring function.
Displays whether the local client supports variable request. If
supports, the local client can send some variable requests to the
remote client to learn about the link status from the response of
the remote client.
Displays the Information TLV revision of Information OAMPDU.
Displays the operating status of the OAM connection.
Disable: OAM is disabled on this port.

LinkFault: The link has detected a fault and is transmitting

OAMPDUs with a link fault indication.
PassiveWait: The port is in passive mode and is waiting to

see if the peer device is OAM capable.
ActiveSendLocal: The port is in active mode and is sending

local information.
SendLocalAndRemote: The local port has discovered the

peer but has not yet accepted or rejected the configuration of
the peer.
SendLocalAndRemoteOK: The local device agrees the OAM

peer entity.
PeeringLocallyRejected: The local OAM entity rejects the

remote peer OAM entity.
PeeringRemotelyRejected: The remote OAM entity rejects the

local device.
NonOperHalfDuplex: Since Ethernet OAM functions are not

designed to work completely over half-duplex ports. This
value indicates Ethernet OAM is enabled but the port is in
half-duplex operation.
Displays the loopback status.
No Loopback: Neither the local client nor the remote client is

in the loopback mode.
Local Loopback: The local client is in the loopback mode.

Remote Loopback: The remote client is in the loopback mode.

Displays the OAM mode of the remote client.
Displays the MAC address of the remote client.
Displays the vender's OUI of the remote client.
An OUI address is a unique identifier assigned by IEEE to a
device vendor.
Displays the maximum size of the OAMPDU.
Displays whether the remote client supports remote loopback
function.
Displays whether the remote client supports unidirectional OAM
operation.
Displays whether the remote client supports link monitoring
function.
123