Stp Security; Port Protect - TP-Link T2600G-28TS User Manual

Port Role:
Port Status:
LAG:
Note:
The port status of one port in different spanning tree instances can be different.
Global configuration Procedure for Spanning Tree function:
Step Operation
1 Make clear roles the switches
play in spanning
instances: root
designated bridge
2 Globally configure
parameters
3 Configure MSTP parameters
for ports
4 Configure the MST region
5 Configure MSTP parameters
for instance ports

7.4 STP Security

Configuring protection function for devices can prevent devices from any malicious attack against
STP features. The STP Security function can be implemented on Port Protect and TC Protect
pages.
Port Protect function is to prevent the devices from any malicious attack against STP features.

7.4.1 Port Protect

On this page you can configure loop protect feature, root protect feature, TC protect feature,
BPDU protect feature and BPDU filter feature for ports. You are suggested to enable
corresponding protection feature for the qualified ports.
Loop Protect

In a stable network, a switch maintains the states of ports by receiving and processing BPDU
packets from the upstream switch. However, when link congestions or link failures occurred to the
network, a down stream switch does not receive BPDU packets for certain period, which results in
spanning trees being regenerated and roles of ports being reselected, and causes the blocked
ports to transit to forwarding state. Therefore, loops may be incurred in the network.
The loop protect function can suppresses loops. With this function enabled, a port, regardless of
the role it plays in instances, is always set to blocking state, when the port does not receive BPDU
Displays the role of the port played in the MSTP Instance.
Displays the working status of the port.
Displays the LAG number which the port belongs to.
Description
Preparation.
tree
bridge or
MSTP Required. Enable Spanning Tree function on the switch
and configure
Tree→STP Config→STP Config page.
Required. Configure MSTP parameters for ports on
Spanning Tree→Port Config→Port Config page.
Required. Create MST region and configure the role the
switch plays in the MST region on Spanning
Tree→MSTP Instance→Region Config and Instance
Config page.
Optional. Configure different instances in the MST region
and configure MSTP parameters for instance ports on
Spanning
Config page.
109
MSTP parameters
Tree→MSTP Instance→Instance
on Spanning
Port