Mode:
Bind Ports:
Operation:
After you have created a profile ID, click Edit to display the following figure.
The following entries are displayed on this screen:
Profile Mode
Profile ID:
Mode:
Add IP-range
Start IP:
End IP:
IP-range Table
Select:
Index:
Start IP:
End IP:
Displays the attribute of the profile.
Permit: Only permit the IP address within the IP range and
deny others.
Deny: Only deny the IP address within the IP range and permit
others.
Displays the ports that the Profile bound to.
Click the Edit button to configure the mode or IP-range of the
Profile.
Displays the Profile ID you have created.
The attributes of the profile.
Permit: Only permit the IP address within the IP range and
deny others.
Deny: Only deny the IP address within the IP range and permit
others.
Enter start IP address of the IP-range.
Enter end IP address of the IP-range.
Select the desired entry for configuration.
Displays index of the IP-range which is not configurable.
Displays the start IP address of the IP-range.
Displays the
end IP address of the IP-range.
152