TP-Link T2600G-28TS User Manual page 196

For IPv4 interface

Click Edit to display the following figure:
Modify Interface

Interface ID:
IP Address Mode:
IP Address:
Subnet Mask:
Admin Status:
Interface Name:
Secondary IP Create

IP Address:
Subnet Mask:
Secondary IP List

Select:
IP Address:
Figure 10-4 IPv4 Interface Config
Display the ID of the interface corresponding to the VLAN
interface, loopback interface, routed port or port channel.
View and modify the IP address allocation mode.
None: without ip.

Static: setup manually.

DHCP: allocated through DHCP.

BOOTP: allocated through BOOTP.

View and modify the IP address of the interface.
View and modify the subnet mask of the interface.
View and modify the Admin status. Choose Disable to disable
the interface's Layer 3 capabilities.
View and modify the interface name.
Specify the secondary IP address of the interface.
Specify the subnet mask of the interface's secondary IP address.
Select the secondary IP.
Displays the secondary IP address of the current interface.
184