Arctic Cat ROV 2013 Service Manual page 61

2. Acceptable width range must be within specifica-
tions.
COUNTERSHAFT
CAUTION
When disassembling the countershaft, care must be
taken to note the direction each major component (dog,
gear) faces. If a major component is installed facing the
wrong direction, transmission damage may occur and/
or the transmission will malfunction. In either case,
complete disassembly and assembly will be required.
Disassembling
1. Remove the shift forks noting the positions for
assembling; then remove the high driven gear outer
washer, high driven gear, high driven gear bearing,
high driven gear bushing, and high driven gear inner
washer.
58
2. Remove the drive gear; then remove the snap ring
securing the reverse driven gear dog and bushing to
the countershaft.
ATV-1017
3. Remove the reverse driven gear dog.
GZ281A
4. Remove the snap ring securing the reverse driven
gear and washer; then remove the washer and gear.
GZ283A
GZ296
GZ312
GZ313A
GZ314