Arctic Cat ROV 2013 Service Manual page 130

2. Carefully install the floating piston into the shock
body until it is below the threads.
3. Using an appropriate location tool, install the float-
ing piston to a depth of 7.0 in. while using the infla-
tion needle to vent the shock body.
4. Using Fox Racing Shock Oil, fill the shock body to
the bottom of the threads; then, allow to sit 1-2 min-
utes to ensure no air is in the oil.
FS154
5. Lubricate the O-ring on the underside of the end cap
with shock oil.
FS155
6. Lower the shock rod into the shock body until the
piston is submerged in oil.
7. While keeping the shock rod fully extended, thread
FS156
the bearing cap into position.
FS157
FS158
FS159
FS160
127