Arctic Cat ROV 2013 Service Manual page 129

8. Using a 5/64-in. Allen-wrench, remove the set screw
from the bearing cap.
9. Using a magnet held against the Allen-wrench,
remove the bleed ball.
10. Using Spanner Wrench (p/n 0644-453), loosen the
bearing cap.
11. Remove the shock rod/piston assembly from the
shock body.
126
12. Drain the oil from the shock body into a suitable con-
tainer.
FS148
13. Using an appropriate floating piston removal tool,
remove the floating piston.
FS149
 NOTE: For ease in removing the piston, use the
inflation needle to help vent the shock body.
FS150
14. Clean and inspect all components.
ASSEMBLING/CHARGING
1. Lubricate the O-ring and wiper on the floating piston
with shock oil.
FS151
FS152
FS153