Arctic Cat ROV 2013 Service Manual page 28

5. Bend the washer tabs down and remove the two cap
screws securing the sprocket to the camshaft; then
drop the sprocket off the camshaft.
6. While holding the chain, slide the sprocket and cam-
shaft out of the cylinder head.
7. Remove the cap screw securing the chain tensioner
(account for a washer); then remove the tensioner.
CC012D
NOTE: Loop the chain over the cylinder and
secure it to keep it from falling into the crankcase.
8. Remove the five nuts securing the cylinder head to
the cylinder; then remove the four cylinder head cap
screws.
CC013D
CC266D
CC014D
CC017D
CC018D
CC016D
25