Arctic Cat ROV 2013 Service Manual page 50

3. Remove the nut securing the fixed driven assembly;
then remove the assembly.
4. Remove the fixed drive face and V-belt.
5. Using an impact driver, remove the cap screws
securing the air intake plate; then remove the plate
cushion.
CD963
6. Remove the cap screws securing the clutch cover.
Note the location of the different-lengthed cap
screws for installing purposes. Using a rubber mallet,
carefully remove the cover. Account for two align-
ment pins.
CD966A
Care must be taken when removing the cover so the
cover gasket is not damaged.
PR388
NOTE: For steps 7-13, refer to illustration
PR398B.
NOTE: To aid in installing, it is recommended the
assemblies are kept together and IN ORDER.
CAUTION
PR393
CD973A
CD974A
47