Arctic Cat ROV 2013 Service Manual page 29

9. Remove the cylinder head from the cylinder, remove
the gasket, and account for four O-rings and two
alignment pins; then remove the cam chain guide.
AT THIS POINT

To service valves and cylinder head, see Servicing Top-
Side Components sub-section.
AT THIS POINT

To inspect cam chain guide, see Servicing Top-Side
Components sub-section.
C. Cylinder
D. Piston
NOTE: Steps 1-9 in the preceding sub-section
must precede this procedure.
10. Loosen the clamp securing the coolant hose to the
union; then detach the hose.
11. Remove the two nuts securing the cylinder to the
crankcase.
26
12. Lift the cylinder off the crankcase taking care not to
allow the piston to drop against the crankcase.
Account for the gasket and two alignment pins.
CC020D
CC022D

To service cylinder, see Servicing Top-Side Compo-
nents sub-section.
AT THIS POINT
CC023D
CC024D
CC025D
CC026D