Continuous Scan - Kyocera TASKalfa 306ci Operation Manual

Using Various Functions > Functions
Copying
Prints 1-sided originals to 2-sided, or 2-sided originals to 1-sided. Select the binding orientation for original and finished
documents.
Item
1-sided>>1-sided
1-sided>>2-sided
2-sided>>1-sided
2-sided>>2-sided
Others Duplex
Binding in Original
Binding in Finishing
Original Orientation
*1 Displayed when [2-sided>>1-sided] or [2-sided>>2-sided] is selected for "Duplex".
*2 Displayed when [1-sided>>2-sided] or [2-sided>>2-sided] is selected for "Duplex".
When placing the original on the platen, consecutively replace each original and press the [Start] key.
After scanning all originals, select [Finish Scan] to start copying.
Printing
Print a document on both sides of the paper.
Item
1-sided
2-sided
2-sided

Continuous Scan

Scan to
Copy
Send
USB
Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [Finish Scan].
(Value: [Off] / [On])
Value
―
―
―
―
1-sided>>1-sided,
1-sided>>2-sided,
2-sided>>1-sided,
2-sided>>2-sided
*1
Left/Right, Top
*2
Left/Right, Top
Top Edge on Top,
Top Edge on Left
Disables the function.
Prints a 2-sided document so that the sheets are aligned properly for binding on the left
or right.
Prints a 2-sided document so that the sheets are aligned properly for binding on the top.
1 11
1~10 11~20 21~30
Disables the function.
Copy the original with the default setting. For the default
settings, refer to the following:
Function Defaults (page 8-16)
Select the desired duplex option.
Select the binding orientation of originals.
Select the binding orientation of copies.
Select the orientation of the original document top edge to
scan correct direction.
Description
21 1
1~30
6-28
Description