Kyocera TASKalfa 306ci Operation Manual page 327

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2
Enter the user information.
1
Select the key to which you want to register a user.
2
Select .
[ ]
System Menu/Counter.
Simple login settings - Simple Login Setup
01 None 02 None
04 None 05 None
07 None 08 None
Menu
3
To specify the user from local users, select [Local User]. To specify from network users,
select [Network User].
The procedure differs depending on the transmission method selected.
Specifying the user from local users
Select the user to be set for simple login.
NOTE
• To sort the user list, select [Menu] > [Sort (Name)] and [Sort (Login User Name)].
• To search by name or login user name, select [Menu] > [Search (Name)] or [Search
(Login User Name)].
Specifying the user from network users
System Menu/Counter.
Add - Network User
Login User Name
Login Password
Cancel < Back
Select [Keyboard] for "Login User Name" and "Login Password", enter the information of the
user to be registered, and select [OK].
If you are specifying a user for whom a domain is set in network authentication, select the
"Domain" and select the domain where the user is registered.
Select [Next].
NOTE
For details on entering characters, refer to the following:
Character Entry Method (page 11-8)
4
Enter the user name to be displayed, and select [OK].
NOTE
For details on entering characters, refer to the following:
Character Entry Method (page 11-8)
10:10
03 None
06 None
1/3
09 None
End
10:10
Keyboard
Keyboard
Next >
9-26