Kyocera TASKalfa 306ci Operation Manual page 301

Setup and Registration (System Menu) > System Menu
Item
Calibration Cycle
Tone Curve Adjustment
Drum Refresh
Calibration
Laser Scanner Cleaning
Service Setting
Set the calibration cycle.
Value:
Auto: Automatically sets the cycle for calibration.
Short:: Priority is given to image quality.
Standard: Balances image quality and print speed.
Long: Priority is given to print speed.
After prolonged use, or from the effects of surrounding temperature or humidity, the printed
output tone may differ from the original. Perform this function to ensure consistency with the
original tone.
Tone Curve Adjustment (page 10-35)
Remove image blur and white dots from the printout. It takes about 3 minutes. The time
required may vary depending on the operating environment and this process may take time.
Drum Refresh (page 10-36)
NOTE
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is
done.
Adjust color drift or hue of printed image in the most appropriate color.
Calibration (page 10-37)
Remove vertical lines from the printout.
Laser Scanner Cleaning (page 10-37)
Settings for machine maintenance and inspection. This menu is primarily used by service
technicians to perform maintenance.
8-43
Description