Kyocera TASKalfa 306ci Operation Manual page 289

Setup and Registration (System Menu) > System Menu
Item
Protocol Detail
NetBEUI
LPD
SMTP (E-mail TX)
POP3 (E-mail RX)
FTP Client
(Transmission)
FTP Server (Reception)
SMB Client
(Transmission)
LDAP
SNMP
SNMPv3
HTTP
HTTPS
IPP
IPP over SSL
RAW Port
*1 The setting will be changed after restarting the device or the network for the machine.
*2 Set "SSL" to [On] in "Secure Protocol".
Secure Protocol (page 8-33)
―
Selects whether or not to receive documents using NetBEUI.
Value: Off, On
Select whether or not to receive documents using LPD.
Value: Off, On
Select whether or not to send e-mail using SMTP.
Value: Off, On
Select whether or not to receive e-mail using POP3.
Value: Off, On
Select whether or not to send documents using FTP. To use the FTP Client, set the protocol to
[On]. The default port number is 21.
Value: Off, On
Select whether or not to receive documents using FTP.
Value: Off, On
Select whether or not to send documents using SMB. To use the SMB Client, set the protocol to
[On]. The default port number is 445.
Value: Off, On
Select whether or not to use LDAP.
Value: Off, On
Select whether or not to communicate using SNMP.
Value: Off, On
Select whether or not to communicate using SNMPv3.
Value: Off, On
Select whether or not to communicate using HTTP.
Value: Off, On
Select whether or not to communicate using HTTPS.
Value: Off, On
Select whether or not to receive documents using IPP. To use the IPP protocol, set [IPP] to
[On], and set [SSL] to [Off]. In addition, select [Not Secure (IPP&IPPS)] on IPP Security under
Security Settings from the Command Center RX. The default port number is 631.
Value: Off, On
Select whether or not to use IPP over SSL. To use the IPP protocol, set [IPP] and [SSL] to [On].
The default port number is 443.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. The default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Select whether or not to receive documents using RAW Port.
Value: Off, On
8-31
Description
*1
*1
*1
*1
*1
*1 *2
*1 *2
*1
*1 *2
*1