Kyocera TASKalfa 306ci Operation Manual page 182

Operation on the Machine > Sending Document to Folder on an FTP Server (Scan to FTP)
5
6
7
8
9
Enter the destination information.
Enter the next information. Once you have entered one item, select [Next] to advance to the
next item.
Character Entry Method (page 11-8)
The table below lists the items to be set.
Item
Host Name
*1
Path
Port
Login User Name
Login Password
*1 When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the
slash "/" not using the back-slash.
Check the status.
1
Check the information.
Change the delay as required.
2
Check the connection.
[Menu] > [Connection Test]
"Connected." appears when connection to the destination is correctly established. If "Cannot
connect." appears, review the entry.
To enter multiple destinations, select [Next Destination] and enter the next destination.
You can register the entered information in the Address Book by selecting [Add to Address Book].
Select [OK].
Destinations can be changed later.
Confirmation Screen of Destinations (page 5-39)
Select the functions.
Select [Functions] to display other functions.
Send (page 6-4)
Press the [Start] key.
Sending starts.
Data to be entered
Host name or IP address of FTP server
Path to the receiving folder
For example: User\ScanData
Otherwise the data will be saved in the home directory.
Port number
(Normally 21.)
FTP server login user name
FTP server login password
(Case sensitive.)
5-26
Max.
characters
Up to
64 characters
Up to
128 characters
1 - 65535
Up to
64 characters
Up to
64 characters