Original Settings - Kyocera TASKalfa 306ci Operation Manual

Setup and Registration (System Menu) > System Menu

Original Settings

[System Menu/Counter] key > [Common Settings] > [Original Settings]
Configure settings for originals.
Item
Custom Original Size
Auto Detect Original Size (DP)
Auto Detect
System of Units
Legal/OficioII/
216 x 340 mm
Set up frequently-used custom original size.
The custom size option is displayed on the screen to select original size.
Value
Metric
X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
Inch
X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
X=Length, Y=Width
Select whether to automatically detect originals of the document processor.
Select whether to enable automatic detection of original size.
Value: off, on
Select inch or metric for the unit of original size detection.
Value: Metric, Inch
NOTE
When [Auto Detect] is set to [Off], this function will not be displayed.
As Legal, OficioII and 216 x 340 mm are similar in size, select either one of them for automatic
detection.
Value: Legal, OficioII, 216 x 340 mm
NOTE
When [Auto Detect] is set to [Off], this function will not be displayed.
When [System of Units] is set to [Metric], this function will not be displayed.
8-11
Description
Horizontal