Staple - Kyocera TASKalfa 306ci Operation Manual

Using Various Functions > Functions
Item
Offset Each
Page
Offset Each
Set
NOTE
The paper sizes supported in Offset are Legal, Oficio II, Letter, Folio, A4, 16K and 216×340mm.

Staple

Print from Print from
Copy
Box USB
Staples the finished documents. The staple position can be selected.
NOTE
This function requires the optional Sheet Finisher.
For details on paper sizes and numbers of sheets that can be stapled, refer to the following:
Innner Finisher (page 11-24)
Item
Off

Staple

1 staple
2 staple
Others
Top Edge on Top, Top Edge on Left
Original
Orientation
Image
Value
1 staple (Top Left)
1 staple (Top Right)
2 staples (Left)
2 staples (Top)
2 staples (Right)
6-13
Description
Printed copies are collated and output as individual pages
separately.
Printed copies are collated and output as individual set separately.
Select the staple position. For details on original orientation
and staple position, refer to the following:
Original Orientation and Staple Position (page 6-14)
Select the orientation of the original document top edge to
scan correct direction. Select [Original Orientation] to choose
orientation of the originals, either [Top Edge on Top] or [Top
Edge on Left]. Then select [OK].
Description