Auto Sleep; Sleep Rules (Models For Europe); Sleep Level (Energy Saver And Quick Recovery) (Models Except For Europe) - Kyocera TASKalfa 306ci Operation Manual

Installing and Setting up the Machine > Energy Saver function

Auto Sleep

Auto Sleep automatically switches the machine into Sleep if left idle for a preset time.
The default preset time is 20 minutes (models for Europe) or 30 minutes (models except for Europe).
To change the preset sleep time, refer to the following:
Quick Setup Wizard (page 2-28)
NOTE
If the Low Power Timer is equal to the Sleep Timer, a Sleep mode is preceded.

Sleep Rules (models for Europe)

You can set whether sleep mode operates for each function. When the machine enters sleep mode, the ID card cannot
be recognized.
For more information on Sleep Rules settings, refer to the following:
Sleep Rules (models for Europe) (page 8-41)
Sleep Level (Energy Saver and Quick Recovery)
(models except for Europe)
For sleep level, you can toggle between the following two modes: Energy Saver mode and Quick Recovery mode. The
default setting is Energy Saver mode.
Energy Saver mode reduces power consumption even more than Quick Recovery mode, and allows Sleep Mode to be
set separately for each function. The ID card cannot be recognized.
NOTE
If the optional Network Interface Kit is installed, Energy Saver cannot be specified.
To resume, select the [Energy Saver] key on the operation panel. If print data is received during Sleep, the machine
automatically wakes up and starts printing.
For more information on Sleep Level settings, refer to the following:
Quick Setup Wizard (page 2-28)
2-27