Quick Setup Wizard - Kyocera TASKalfa 306ci Operation Manual

Installing and Setting up the Machine > Quick Setup Wizard

Quick Setup Wizard

For FAX functions, paper settings, Energy Saver functions and network settings, the following settings can be configured
in a wizard-style screen.
*1
FAX Setup
Energy Saver Setup
Network Setup
*1 FAX functions are available only on products with the fax function installed.
*2 Inch version only.
*3 DRD reception mode is available for some countries.
*4 This setting does not appear in some regions.
*5 Displayed only when the optional Job Separator and mailbox are installed.
*6 Not displayed when "Obtain IP Address" is set to [Auto (DHCP)].
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login]. For this,
you need to login with administrator privileges. The factory default login user name and login password are set as
shown below.
Login User Name: 3000
Login Password: 3000
1
Configures basic fax settings.
1. Dialing/RX Mode
2. Local FAX Info.
3. Sound
4. Rings
5. Output
6. Redial
Configures sleep mode and low power mode.
1. Sleep Mode
2. Low Power Mode
Configures network settings.
1. Network
Display the screen.
[System Menu/Counter] key > [Quick Setup Wizard]
Dialing Mode
Reception Mode
*3
Auto (DRD)
Local FAX Name
Local FAX Number
Local FAX ID
TTI
Speaker Volume
Monitor Volume
Job Finish Buzzer
*4
Normal
Answering Machine
FAX/TEL Switch
Paper Output
Retry Times
Sleep Timer
Sleep Level (models except for Europe)
Low Power Timer
Obtain IP Address
*6
IP Address
Subnet Mask
Default Gateway
2-28
*2
*4
*4
*5
*6
*6